RALEIGH, NC · ENERGY
Commercial energy audits in Raleigh.
We assess energy use in Raleigh commercial buildings and help teams choose the right operating changes and capital projects.
Find the waste before you buy the upgrade.
Most commercial buildings are paying for energy they never use. A proper commercial energy audit puts numbers on it: where the waste is, what the fix costs, and what it returns. From there, efficiency consultants sequence the upgrades so the cheap wins pay for the big ones.
The audit also tells you when the answer is bigger than efficiency. High demand charges point at battery storage; aging equipment points at a mechanical replacement that pays back in utility savings. Either way, you decide with real numbers on the table.
START HERE
What does a Raleigh commercial energy audit cover?
Commercial energy audits show Raleigh building teams where energy is used and which changes deserve a closer look. We can assess facility support equipment, process equipment, and HVAC controls. The depth depends on the building and the decision your team must make. A basic review can find simple operating changes. A deeper audit can study capital projects and their likely return. If your team is weighing a large upgrade, an investment-grade review can test that measure with detailed analysis or a computer model.
Match the audit to the decision
Choose the audit level based on what your Raleigh team must approve. A Level 1 audit is suited to a first look for simple changes. A Level 2 audit gives more detail for comparing capital projects. A Level 3 audit focuses on a few measures with high capital needs and may use computer models. Level 3 is a poor fit when your team has not narrowed the project list. It is meant to build on findings from Level 1 and Level 2 audits.
Audit depth
Which commercial energy audits fit Raleigh buildings?
PROJECT PLANNING
What should a Raleigh energy audit test?
WHAT WE HANDLE
Everything under the energy door.
MANAGEMENT
Local records
What records guide commercial energy audits in Raleigh?
BEFORE YOU BUY
How should Raleigh teams use the audit report?
- Sort no-cost and low-cost HVAC control changes from capital projects. Flux uses this to keep operating fixes from being held up by project funding.
- Compare each proposed measure with the building’s past audit records. Remove measures that were already installed or no longer fit.
- Use Level 1 findings to decide whether a Level 2 study is needed. Move to Level 3 only after the team has chosen a small set of major measures.
- For a project that needs a permit, place Raleigh inspection steps in the project plan after permit issuance.
Project in Raleigh?
Tell us the building, exact scope, and target date. Flux will review the request and send the next step.
QUESTIONS
Straight answers.
What can a commercial energy audit include in Raleigh?
It can cover facility support equipment, process equipment, HVAC controls, energy records, and selected capital measures. The scope depends on the buyer’s decision.
When is an ASHRAE Level 3 audit a good fit?
It fits when a Raleigh building team is studying a few high-cost energy measures and needs a closer test of feasibility and economic value.
Should we repeat a past energy audit?
First, check which past measures were installed. If the main measures are complete, repeating the same scope may offer less value.
Does an audit replace Raleigh permits or inspections?
No. The audit helps choose a project. If that project requires a permit, Raleigh conducts commercial inspections after the permit is issued.
GET STARTED
Find the waste in your building.
The audit is free to scope, and most audits find their fee several times over. Tell us about the building and we'll price yours.
MORE SERVICE AREAS