COMMERCIAL ENERGY · AUTOMATION · FACILITY SERVICES
Commercial contractors in Fresno.
We plan and manage commercial building repairs, upgrades, and trade work for Fresno facilities.
WHAT WE DO
From energy audits to robot repair.
Energy
Find the waste, fund the fix.
Energy audits
Audit cost & pricing
Efficiency consultants
ALL ENERGY →
Battery
Storage that pays for itself.
BESS installation
Battery backup
Containerized BESS
ALL BATTERY →
EV
Charging that shows up on time.
EV charging installation
Fleet charging
Workplace charging
ALL EV →
Robots
Automation that earns its floor space.
Cleaning robots
Autonomous floor scrubbers
Security robots
ALL ROBOTS →
Mechanical
The big installs, built right.
HVAC installation & replacement
Ductwork installation
Sheet metal & pipe fabrication
ALL MECHANICAL →
Maintenance
The trades that keep buildings alive.
HVAC service
Electricians
Roofing
ALL MAINTENANCE →
Not sure where it fits?
Reach out. We scope it and put the right team on it, whatever the trade.
FRESNO BY THE NUMBERS
What Fresno does to buildings.
SUMMER
IS THE STRESS TEST
Cooling season is when undersized equipment shows itself.
556K
PEOPLE STRONG
Fresno commercial buildings keep a growing market running.
START HERE
How to choose commercial contractors in Fresno
Choose a team that can define the job, name each trade, and show the permit path before work starts. In Fresno, a permit may be needed to alter, repair, demolish, or change the use of a commercial building. Electrical, gas, mechanical, and plumbing changes may also need permits. Ask who will submit the plans and answer plan check notes. We build the scope around those records. A team is a poor fit if it cannot state what will be changed, which permit applies, or who will close each inspection.
Permit Scope Check
What permits may affect a Fresno commercial project?
- Building changes: Name the wall, opening, roof area, or structural part being changed. That decides what must appear in the permit plans.
- Occupancy changes: Record the current and planned building use. A change in occupancy can trigger a Fresno permit review.
- Trade systems: List each electrical, gas, mechanical, and plumbing change. That sets which trade permits belong in the project scope.
- Fire review: For sites served by the Fresno County Fire Protection District, check vehicle access, fire water supply, site plans, elevations, and floor plans. The district calls for 2 plan sets at 24 by 36 inches.
Contractor Record Check
How should Fresno businesses screen a commercial contractor?
California license
Pass or fail
Check the contractor license before award. A missing or invalid license is a fail for work that requires a licensed contractor.
Liability proof
Insurance record
Ask for current liability insurance records. California licensees with five or fewer people must show a cumulative limit of $1 million; the stated limit rises by $100,000 for each added person, up to $5 million.
Workers’ compensation
Staffing check
Confirm workers’ compensation insurance when the contractor has employees. Missing proof changes whether the contractor can enter the approved vendor list.
Bond record
License record
Confirm the contractor bond tied to the California license. If the bond cannot be verified, hold the award until the record is clear.
POWER & AUTOMATION
Battery storage, EV charging, and robots that work.
Commercial buildings are adding batteries, chargers, and floor robots faster than most contractors can keep up. We design and install battery energy storage systems, handle utility interconnection, and build EV charging from a pair of stalls to a full fleet depot.
On the automation side, we deploy cleaning and security robots that pay for themselves in labor, then keep every piece of it running. Planning any of this? Get in touch and get a real number for your building.
Get in touchHOW IT WORKS
From first call to finished work.
01
Get in touch
Tell us the building and the problem. Two minutes, no phone tag.
02
Get a scoped proposal
We assess the site, engineer the fix, and put a real price on it.
03
The work gets done
Vetted, insured local crews, with one point of contact from scope to done.
WHY FLUX
One call covers the whole building.
Every trade, one contact
Mechanical, electrical, energy, robots. You deal with one person from scope to done.
Licensed local crews
Insured crews from your market, vetted before they walk your site.
A real price, fast
Free site visit, scoped proposal, and a number you can take to your board.
Built for what's next
Battery storage, EV charging, and facility robots alongside the trades you already buy.
THE CORE TRADES
The trades that keep a building running.
HVAC, plumbing, electrical, roofing. The unglamorous work is most of the job, and slow contractors are where it costs you. Our mechanical crews handle installs and replacements, from rooftop units to boilers, chillers, and process piping.
Maintenance covers the rest: service calls, electricians, roofing, fire and life safety, landscaping, and snow. Not sure where to start? An energy audit finds the waste and funds the fix.
Get in touchWHO WE SERVE
Every kind of commercial building.
Office & corporate
Tenant comfort, uptime, and energy costs under control.
Industrial & manufacturing
Process piping, automation, and the power to run it.
Warehouse & logistics
Docks, floors, charging, and robots that earn their space.
Retail & hospitality
Fast fixes and clean installs that never touch open hours.
Healthcare & medical
Code-first work in buildings that can't go down.
Multifamily & HOA
One contact for the whole property, every trade.
POPULAR PROJECTS
What we get asked for most.
QUESTIONS
Straight answers.
When does a Fresno commercial building project need a permit?
A permit may be required to build, alter, repair, move, demolish, or change occupancy. Electrical, gas, mechanical, and plumbing changes may also require one.
What should our Fresno permit plans show?
The plans should clearly show the project scope so plan check staff can review the proposed building and trade changes.
Does a Fresno fire review need separate plans?
For a site under the Fresno County Fire Protection District, the Fire Prevention Bureau calls for a permit application and 2 plan sets sized 24 by 36 inches.
What is a clear reason to reject a contractor bid?
Reject or hold a bid when the contractor cannot verify the needed license, bond, insurance record, permit path, or inspection owner for the Fresno project.
GET STARTED
One call away.
Tell us the building and the problem. We bring the plan, the price, and the crew. Site visits are free, always.
MORE SERVICE AREAS