COMMERCIAL ENERGY · AUTOMATION · FACILITY SERVICES
Commercial contractors in Fort Worth.
Flux Facility builds, finishes out, and repairs commercial and industrial buildings across Fort Worth, from site grading and permits through tenant turnover.
WHAT WE DO
From energy audits to robot repair.
Energy
Find the waste, fund the fix.
Energy audits
Audit cost & pricing
Efficiency consultants
ALL ENERGY →
Battery
Storage that pays for itself.
BESS installation
Battery backup
Containerized BESS
ALL BATTERY →
EV
Charging that shows up on time.
EV charging installation
Fleet charging
Workplace charging
ALL EV →
Robots
Automation that earns its floor space.
Cleaning robots
Autonomous floor scrubbers
Security robots
ALL ROBOTS →
Mechanical
The big installs, built right.
HVAC installation & replacement
Ductwork installation
Sheet metal & pipe fabrication
ALL MECHANICAL →
Maintenance
The trades that keep buildings alive.
HVAC service
Electricians
Roofing
ALL MAINTENANCE →
Not sure where it fits?
Reach out. We scope it and put the right team on it, whatever the trade.
FORT WORTH BY THE NUMBERS
What Fort Worth does to buildings.
42"
RAIN A YEAR
Storm season is the real maintenance calendar here.
SUMMER
IS THE STRESS TEST
Cooling season is when undersized equipment shows itself.
1028K
PEOPLE STRONG
Fort Worth commercial buildings keep a growing market running.
START HERE
What do Fort Worth commercial building owners need from a contractor?
We build, remodel, and repair commercial buildings in Fort Worth — offices, retail space, warehouses, and industrial sites. One Flux crew covers the dirt work, the shell, the finish-out, and the punch list of final fixes before you take the space.
The City of Fort Worth has adopted the 2021 International Building, Mechanical, Plumbing, Fuel Gas, and Fire Codes, each with local amendments, and the city adopts new code editions every other three-year cycle. We check your drawings against the editions in force now, then take the permit package to Development Services.
Project types
What commercial construction work does Flux handle in Fort Worth?
Ground-up commercial buildings
Offices, retail, industrial
Mass grading, storm systems, underground utilities, and paving set the calendar on a Fort Worth site, and the slab and steel wait on that work. We run the dirt package and the building package on one schedule and price both in one preconstruction number.
Tilt-wall panel work
Distribution shells
Wall panels get cast flat on the ground at the site, then craned upright in a set order. In August the average high in Fort Worth is 96°F, and overnight lows average 75°F. We book pours and lifts for the early hours and lock that sequence before the crane is scheduled.
Warehouse docks and truck circulation
Layout decisions
Dock count, door spacing, and the truck turning path get settled with you before panel casting starts. Bring your trailer size and daily truck counts; those two numbers drive the drive-lane layout and the yard depth we lay out.
Tenant finish-out and turnover
Occupied buildings
Finish-out covers walls, ceilings, lighting, power drops, and the final fix list that gets a suite ready to occupy. We phase the work around tenants who stay open and hand over permit sign-offs and equipment paperwork at turnover.
Repairs and small projects
Service work
Roof leaks, storefront and door damage, slab patching, and lighting or power fixes come in as single work orders instead of full projects. We price those off a site visit and keep the same contact you use on the larger builds.
Bid package inputs
What do we need to price a commercial project in Fort Worth?
- Building facts: square footage, building age, the equipment already installed, ownership, tenant mix, and how the space is occupied. We use those to set crew size, work hours, and how much of the job runs after hours.
- Permit history on the address. We pull the prior permits before pricing so an open or expired permit does not surface in the middle of the job.
- Code editions on your drawings. Fort Worth runs the 2015 energy code and the 2023 National Electrical Code alongside the 2021 building codes. We check lighting, mechanical, and power sheets against those editions, because the years do not match.
- One decision-maker. Name the facilities, engineering, or property management contact who can approve a change order, and we route every field question to that person.
- Payment terms. Construction billing runs on long payment cycles. We set the milestone billing schedule and the pay window in the contract before we mobilize.
POWER & AUTOMATION
Battery storage, EV charging, and robots that work.
Commercial buildings are adding batteries, chargers, and floor robots faster than most contractors can keep up. We design and install battery energy storage systems, handle utility interconnection, and build EV charging from a pair of stalls to a full fleet depot.
On the automation side, we deploy cleaning and security robots that pay for themselves in labor, then keep every piece of it running. Planning any of this? Get in touch and get a real number for your building.
Get in touchHOW IT WORKS
From first call to finished work.
01
Get in touch
Tell us the building and the problem. Two minutes, no phone tag.
02
Get a scoped proposal
We assess the site, engineer the fix, and put a real price on it.
03
The work gets done
Vetted, insured local crews, with one point of contact from scope to done.
WHY FLUX
One call covers the whole building.
Every trade, one contact
Mechanical, electrical, energy, robots. You deal with one person from scope to done.
Licensed local crews
Insured crews from your market, vetted before they walk your site.
A real price, fast
Free site visit, scoped proposal, and a number you can take to your board.
Built for what's next
Battery storage, EV charging, and facility robots alongside the trades you already buy.
THE CORE TRADES
The trades that keep a building running.
HVAC, plumbing, electrical, roofing. The unglamorous work is most of the job, and slow contractors are where it costs you. Our mechanical crews handle installs and replacements, from rooftop units to boilers, chillers, and process piping.
Maintenance covers the rest: service calls, electricians, roofing, fire and life safety, landscaping, and snow. Not sure where to start? An energy audit finds the waste and funds the fix.
Get in touchWHO WE SERVE
Every kind of commercial building.
Office & corporate
Tenant comfort, uptime, and energy costs under control.
Industrial & manufacturing
Process piping, automation, and the power to run it.
Warehouse & logistics
Docks, floors, charging, and robots that earn their space.
Retail & hospitality
Fast fixes and clean installs that never touch open hours.
Healthcare & medical
Code-first work in buildings that can't go down.
Multifamily & HOA
One contact for the whole property, every trade.
POPULAR PROJECTS
What we get asked for most.
QUESTIONS
Straight answers.
Who are some commercial general contractors in Fort Worth, Texas?
Flux Facility works on commercial and industrial buildings across Fort Worth and Tarrant County. Send the address and the scope, and one Flux contact owns the permit, the schedule, and the field crew from bid through turnover.
What is the difference between a general contractor and a commercial contractor?
A general contractor runs the trades, the schedule, and the permit on a build. Commercial contractor describes the buildings — offices, warehouses, plants, and retail space, where a lease date, dock traffic, and an occupancy date drive the plan. Flux takes commercial and industrial work only.
How early should we start a ground-up commercial build in Fort Worth?
Start with the dirt and the power. Oncor is the electric utility across the Dallas–Fort Worth area, and it publishes Electric Service Guidelines for new construction. We file the service request and the permit package while grading is still underway, then hold the connection date in the schedule.
Can Flux remodel a Fort Worth building while it stays open?
Fort Worth has adopted the 2021 International Existing Building Code with local amendments, and that is the code set for alterations in a building already in use. We plan night and weekend windows, dust and exit protection, and staged shutdowns so your tenants keep operating.
GET STARTED
One call away.
Tell us the building and the problem. We bring the plan, the price, and the crew. Site visits are free, always.
MORE SERVICE AREAS