ARLINGTON, TX · SOLAR
Commercial solar installation in Arlington.
We plan and install solar arrays for commercial roofs and sites in Arlington, TX.
Start with the building, not the panels.
A commercial solar project has to fit the site, the roof, the electrical system, and the utility rules. We start with a solar feasibility study, then compare rooftop solar with solar carports where parking offers the stronger site.
One team carries design, permits, utility interconnection, construction, commissioning, and solar maintenance. We also compare direct ownership with solar financing and PPAs, and add battery storage only when it has a clear job.
START HERE
What should Arlington businesses check before installing solar?
Commercial solar installation in Arlington starts with a roof that can carry the array, stay watertight, and leave safe access for crews. We check roof condition, structure, usable space, panel angle, and the electrical path before the final design. The roof is a poor fit if it cannot support the added load or needs major roof work first. Solar arrays may add about 2 to 4 pounds per square foot. Fixing a weak or aging roof before panels go on can avoid later panel removal and reinstallation.
Clear the roof decision first
A full roof condition survey is the key first step for an Arlington commercial building. It must name membrane damage, leaks, weak areas, roof age, and needed repairs. If the roof is already 15 years old or more, it may need repair or replacement before solar panels are installed. That finding changes the project order and may change whether the roof is a fit at all. We do not place an array over a roof that fails its structural or waterproofing checks.
Roof fit
Commercial solar installation roof checks in Arlington
Structural load check
PASS/FAIL
We verify whether the roof can carry about 2 to 4 pounds per square foot from the solar array. A failed check stops rooftop design or moves the array to another site.
Roof condition survey
ROOF
The survey records leaks, membrane damage, weak areas, and needed repairs. Those findings set whether roofing must come before panel mounting.
Roof age record
AGE
A roof age of 15 years or more can point to repair or replacement first. That decision can prevent panel removal when later roof work is due.
Access layout
LAYOUT
We mark usable roof space and safe crew access. Those paths reduce panel area but keep installation and later maintenance reachable.
WHAT WE HANDLE
Everything under the solar door.
PROJECT PLANNING
How panel layout affects an Arlington solar project
Tilt decision
ANGLE
A 15° to 40° south-facing panel angle can support strong production in the continental United States. The chosen angle changes output and roof loading.
Wind-load tradeoff
WIND
A lower tilt can reduce wind load. A steeper tilt increases wind load, so the final angle must fit the roof and exposure.
Flush-mount choice
TRADEOFF
Flush panels may be chosen for appearance and lower wind load even when tilt and direction are not ideal for production.
Rain exposure
WATER
Arlington averages about 39 inches of rain a year. Roof penetrations and waterproofing details must protect the roof before the array is accepted.
Permit path
Commercial solar installation approvals in Arlington
- Confirm the project address and building type before filing; that choice sets the commercial permit path.
- Identify the electrical work in the solar scope; Arlington lists electrical work under its building permit options.
- Record whether roof or site changes require a commercial building permit; the answer changes the filing package.
- Match the final array and electrical drawings to the permit application so the filed plan reflects the system being installed.
BEFORE YOU BUY
What Flux verifies before solar handoff in Arlington
- Compare the installed panel locations with the approved layout; any mismatch changes access, spacing, or the final record.
- Check mounting points and roof seals for visible gaps or damage; a failed seal must be corrected before handoff.
- Confirm the installed panel tilt matches the design because a changed angle affects production and wind load.
- Record the final array, electrical equipment, and access paths so facility teams know what was installed and where.
- Complete commissioning checks before the system enters normal commercial operation.
QUESTIONS
Straight answers.
Can every Arlington commercial roof support solar panels?
No. The roof must pass structural, waterproofing, and layout checks. A roof that cannot carry the array is not a fit for rooftop solar without a design change.
Should an older commercial roof be repaired before solar is installed?
It may need to be. A roof that is 15 years old or more may need repair or replacement first, which can avoid removing panels for later roof work.
Does Arlington provide online permit applications for commercial solar work?
Arlington lists online application options for electrical work and commercial building permits. The project scope decides which filing path applies.
Why does panel angle matter on an Arlington commercial building?
Panel angle affects production and wind load. Lower angles can reduce wind load, while a steeper angle adds more load from wind.
GET STARTED
Tell us about the building.
Whatever the trade, we scope it, price it, and put the right crew on it. Site visits are free, always.
MORE SERVICE AREAS